Pocket Folding Table Edge Bag Hook

A 46 mm disc that lives in your pocket, sits on the table in a cafe, and folds a hook down over the edge to hang your bag off the floor.

WHAT YOU GET

• 01_Masa_Ustu_Pabuclu_Taban.stl -- table-top base

• 02_Katlanir_Canta_Kancasi.stl -- folding hook

• 03_Mentese_Pimi.stl -- hinge pin

• 00_Tum_Parcalar_Baski_Tablasi.stl -- all parts on one plate

KEY DIMENSIONS (mm)

• Folded base diameter: 46

• Max table thickness: approx. 45

• Hook width: 6

PRINT SETTINGS

• PETG, 0.16-0.20 mm layers, 4 walls

• Parts print separately with no supports; a non-slip pad can be glued under the base

ASSEMBLY

Set the hook between the two ears of the base and fit the pin. Put the disc on the table and swing the hook down over the edge, then hang the bag strap in the lower curve. Fold the hook back around the disc to carry it.

Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.

License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.