Mini TRIM WHEEL Cessna C152 C172
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mini Trim Wheel, panel mounting. Only a normal potentiometer is needed, The whell makes 5 revolutions in total.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed PETG 0,2.
Wheel printed horizontally with supports in matte PLA.Front panel printed vertically in two colors with supports.Assembly:
Insert the insert nuts in the chassis, insert the bushing shaft into gears
Mount the Pot. onto the chassis.
Mount gear2 ( bolt, washers, nut) has shown in fig.3. Use the nut to secure the bolt after finding the correct torque. Install the pot. gear.
Prepare entair Wheel assembly by keeping the end of the bolt slightly protruding, assemble it with the other gears (posizionig the Pot. at the halfway and the gear with the arrow in the center) then screw it and use the nut to secure the bolt like point 3.
Secure the nuts with threadlock.