MAGNETIC Rivets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic rivets for plexiglass and steel panels — easy to attach and remove. Additional versions with PTFE tube holders.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 8
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Standard Digital File License
Standard plastic rivets make removing and reattaching the plexiglass panels on the Prusa Core One(+) a real chore.
The minimalistic magnetic rivets come off and attach within seconds. No fiddling and no tools required.
Two of the four variants add a second function: mounting PTFE tubes for filament fed from an external spool or dry box.
Four Variants
Standard rivet: The plain panel fastener. Magnets drop in from the top. Fastest print.
Standard rivet with closing cap: Same function as variant 1, but the magnets slide in sideways and a separate cap closes the top.
PTFE-cap: Snaps magnetically onto the standard rivet and carries up to three 4 mm OD PTFE tubes. Apply super glue if necessary.
PTFE rivet: One-piece, one integrated tube pass-through. Lower profile than variant 3, where a single tube is enough. Magnets slide in from the side.
All three versions are held via two 10 × 3 mm round magnets.
Print Settings
Setting | Value |
|---|---|
Layer height | 0.15 mm – balanced |
Material | PLA+, PETG or better |
Supports | Everywhere. |
Infill | 0% |
PLA+ is workable, but PETG or a more robust material is the better choice.
Parts Required
Part | Magnets, 10 × 3 mm round |
|---|---|
Standard rivet | 2 |
Standard rivet with cap | 2 |
PTFE-cap | 2 |
PTFE-rivet | 2 |
Compatibility
The magnetic rivets are not Prusa Core One (+) specific and fit on any steel sheet panel with a 3mm diameter hole.