Rudimentary Compass Tool for Engineering and Art Drawing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adjustable compass for easy drawing of arcs and circles with high accuracy
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 53
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
An adjustable compass for easy drawing of arcs and circles.
If you need finer less variation in the diameter while drawing, you can whittle down the point after printing.
REQUIRED HARDWARE
All it needs is 2 small M4 screws, one to hold the pencil, and another for holding the arm in the desired position.
PRINTING AND ASSEMBELY
The parts should be printed on their flattest side, using whatever settings work best for you.
The arm which holds the pencil can be snap fit onto the pin on the top of the lower_pivot part. (make sure it is oriented the correct way, with the hole in the arm aligning with the hollow arc in the pivot. Then the upper_pivot part can be friction fit onto the lower_pivot part with the pins.