IKEA Vidga connector and wall mounting clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Combined rail connector and wall mounting clip
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
IKEA Vidga Dual Rail Joiner + Wall Mounting Bracket
Reinforce and align longer curtain track setups with this combination joiner and wall clip. Designed to seamlessly connect two IKEA Vidga rails together while serving as a sturdy wall-mount point.
Secure Clamping: Uses 2x M4 screws and nuts to mechanically lock both rail ends in place, eliminating gaps and unwanted sliding.
Integrated Mount: Doubles as a wall bracket clip to keep the joined section fully supported.
Compatibility: Designed specifically for the IKEA Vidga rail profile.
Required Hardware: 2x M4 screws and 2x M4 hex nuts.
Print Recommendations: Printed with 15% infill (Gyroid) with PETG and 0,2mm layer height
Of course, you can use shorter screws so that they are hidden. I just didn't have some.
