IKEA Vidga connector and wall mounting clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combined rail connector and wall mounting clip
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
IKEA Vidga Dual Rail Joiner + Wall Mounting Bracket
Reinforce and align longer curtain track setups with this combination joiner and wall clip. Designed to seamlessly connect two IKEA Vidga rails together while serving as a sturdy wall-mount point.
Secure Clamping: Uses 2x M4 screws and nuts to mechanically lock both rail ends in place, eliminating gaps and unwanted sliding.
Integrated Mount: Doubles as a wall bracket clip to keep the joined section fully supported.
Compatibility: Designed specifically for the IKEA Vidga rail profile.
Required Hardware: 2x M4 screws and 2x M4 hex nuts.
Print Recommendations: Printed with 15% infill (Gyroid) with PETG and 0,2mm layer height
Of course, you can use shorter screws so that they are hidden. I just didn't have some.
