1 / 3
link for a XOSS XL400 bike headlight
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
the link that fits between the bike headlight and a GoPro mount
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Open Community License v1.1 + General Attribution v1
Goes between the headlight and the bicycle headunit holder, or GoPro receptacle.
A mate’s bracket broke, so I’ve redrawn it. Original and this rendition suffer from several design defects, which I’ve not fixed; please don’t understand this as endorsement. :-)
Recommended Print Settings
SLS print: 3410 PA or similar
FDM: PET or PA6
Required Parts
(optional) If you didn’t print this as one part (the “unibody” variant) you will need
M4× 6mm bolt, ISO 7380-1 — head <2.4mm
M4 nut, ISO 4032 — about 3mm thick
