Craftsman 3/8 Drive Socket Holders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a 3/8 drive Craftmans Socket orgainer with a slot for each socket
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I made a bunch of socket set holders for 1/2, 3/8, and 1/4. These sets are based on the craftsman sockets.
Sizes Included in 3/8 Drive Set:
Metric- 6mm-22mm
Metric Deep- 13mm-19mm
Standard- ¼, 5/16, 3/8, 7/16, ½, 9/16, 5/8, 11/16, ¾, 3/16, 7/8,
Standard Deep- 3/8, 7/16, ½, 9/16, 5/8, 11/16, 3/4
I personally used three different colors to distinguish ½, 3/8, and ¼, and used color-coded latches to distinguish between Metric and Standard Socket sets. I also added a different latch for 12-point sockets to further contrast with the normal 6-point sockets. The boxes only need two latches per box, so don't print all four that are included in the 3MF files (unless needed). I recommend 5-10% infill and no supports for the best results. I used some brass stock for the hinges (2.4mm rods). A 2.4-2.6mm screw or rod should work too. I used a fine-point Sharpie for the black lettering, but if you have a printer with multicolor printing, you can use that.
Sizes Of Boxes:
Metric- 175mm by 115mm by 40.6mm
Metric Deep- 110mm by 80mm by 73.9mm
Standard- 165mm by 80mm by 40.6mm
Standard Deep- 110mm by 80mm by 74mm
Without Top And No Sockets :
Metric- 175mm by 115mm by 16.8mm
Metric Deep- 110mm by 80mm by 33.45mm
Standard- 165mm by 80mm by 16.8mm
Standard Deep- 110 by 80mm by 33.5mm
1/2 Socket Holders Link
¼ Socket Holders Link
Profile Link
https://www.printables.com/@SBarler_5282717
If you have any questions or comments, please let me know!