Flood light with 3mm LED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small scale 1:14 floodlight based on an actual design with a 3mm LED
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 51
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small detailed floodlight based on an actual design at 1:14 scale fitted with a 3mm LED. An original design on Fusion. The floodlight is contained in the mounting bracket with small friction hinge, however 2mm screws could be used, but not necessary or fixed with adhesive. There is a lens printed in translucent, clear plastic could also be cut as needed.
The LED is fitted and held in place with a back cover retained with 2mm screws, bend the LED legs at 90 deg to suit then connect to cables.
Those shown are printed in PETG to be used outside on a live RC course, but could be any material of choice