1 / 3
Dragon Burner V8 – Raised Orbiter V2.0 Mount for Chaoticlab CNC TAP V2 — image 1
1 / 3

Dragon Burner V8 – Raised Orbiter V2.0 Mount for Chaoticlab CNC TAP V2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Raised Dragon Burner V8 mount that provides clearance between the LDO Orbiter V2.0 extruder and Chaoticlab CNC TAP V2.

Rating
0 / 5
Likes
4
Downloads
21
Makes
0
Views
220
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

Dragon Burner V8 – Raised Orbiter V2.0 Mount

This is a modified upper mount for the Dragon Burner V8 toolhead, designed for use with the LDO Orbiter V2.0 extruder and Chaoticlab CNC TAP V2.

With the standard Dragon Burner V8 mount, the Orbiter V2.0 was positioned too low and interfered with the CNC TAP assembly, making installation impossible. This modified version raises the extruder and provides the necessary clearance above the TAP mechanism.

The part has been installed and tested on my Voron Switchwire.

Compatibility

  • Dragon Burner V8

  • LDO Orbiter V2.0

  • Chaoticlab CNC TAP V2

  • Revo Voron hotend

  • Voron Switchwire

Compatibility with other TAP versions, hotends or toolhead configurations has not been tested.

Printing recommendations

  • Material: ABS or ASA

  • Layer height: 0.20 mm

  • Perimeters: 4–5

  • Infill: 40% or more

  • Use the same print orientation as the original Dragon Burner V8 part

Before heating the hotend or starting a print, check that the filament path is correctly aligned and that the TAP mechanism can move freely.

Credits and license

This model is a remix of the original Dragon Burner V8 design by chirpy2605. Please refer to the original project for the complete toolhead files and assembly instructions.

This remix is shared under the GNU General Public License v3.0.

Tags