Willem GQ-4x4 ADP-056 Adapter Shell with Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shell for the ADP-056 adapter that also provides support to take the load off the GQ ZIF socket.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently bought the GQ 4x4 programmer with the ADP-056 adapter and that large PCB had no protection and much worse, no support for the massive weight hanging off to the side. I decided to rectify that with a full enclosure with the support it needs and taking the pressure off of the ZIF on the main unit.
This uses threaded inserts so you'll need:
6 - m3 x 5mm threaded insert. They go in the top shell
4 - m3 x 8mm screws for securing bottom to top. I used a socket cap.
2 - m3 x 12mm screws for the support print.
Printing: I used supports only to have a cleaning recess for the screw heads. Other than that, it doesn't need supports.