Willem GQ-4x4 ADP-056 Adapter Shell with Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shell for the ADP-056 adapter that also provides support to take the load off the GQ ZIF socket.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently bought the GQ 4x4 programmer with the ADP-056 adapter and that large PCB had no protection and much worse, no support for the massive weight hanging off to the side. I decided to rectify that with a full enclosure with the support it needs and taking the pressure off of the ZIF on the main unit.
This uses threaded inserts so you'll need:
6 - m3 x 5mm threaded insert. They go in the top shell
4 - m3 x 8mm screws for securing bottom to top. I used a socket cap.
2 - m3 x 12mm screws for the support print.
Printing: I used supports only to have a cleaning recess for the screw heads. Other than that, it doesn't need supports.