2020 Corner Bracket 100mm — Heavy Duty Frame Gusset
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
100 mm corner bracket for standard 2020 aluminium extrusion. Adds rigidity to frame joints that rack under load.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 1
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Why this model ?
Internal 2020 bracket (see pictures) is handy in many situations, but it lacks strength.
Unfortunately, in some cases, heavy loads result in assembly deformations on profile connections. The frame racks like a parallelogram instead of a square.
This is the problem this bracket solves.
Specifications
100x100x18 mm + 4mm thickness
screws Ø5.5 mm
Hole spacing: 74.25 mm per arm
Print settings
PETG 0.2mm layers
No support
6 walls, 100% infill
Model already oriented
Hardware
4x M5 screws + T-nuts
4 × wide M5 washers (Ø15) recommended
Tips
There isn't enough clearance for a screwdriver on the inner screws: use needle-nose pliers to tighten them.