LayersFactory
Report model
1 / 10
Lamp Shade upgrade for Ikea Klabb lamp — image 1
1 / 10

Lamp Shade upgrade for Ikea Klabb lamp

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Geoff Williams

Geoff Williams

@GeoffWilliams

Print out a new lamp shade for your old lamp

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
53
Reviews
0

Updated at source:

Model information

Source
Printables
Category
Home Decor
License
Creative Commons — Attribution
DetailsFiles (3)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (1)Related

This is a replacement lampshade for my old Ikea Klabb lamp. This is a one piece print with a central hub that's raised inside the cylinder of the lamp shade, connected with a smooth, continuous joint.

Printing notes

  • Tree supports recommended to give a firm connection to bed

  • Print vertically

  • I used Translucent Green PLA (DARKER) from Siddament : https://siddament.com.au/products/translucent-green-pla

  • Recommend a translucent or filament otherwise the shade would block most of the light

  • Took about 20 hours and 500+g filament on MK4/S. I didn't use variable layer height as I wanted to use tree supports

  • Print out the shadehub part to test fit your lamp before committing to the big print. May fit other lamps too, measure before printing

  • Two STLs are supplied: 

    • shade.stl Plain (smooth) geometry

    • shade_texturised.stl Added a cool texture using the awesome https://bumpmesh.com/ from CNC Kitchen. This is the version I printed, see close-up photos

Installation:

  1. Turn off lamp

  2. Remove bulb

  3. Unscrew clip that retains the old lamp shade, it will lift off

  4. Push new lamp shade over bulb holder

  5. Secure with clip

  6. Insert bulb

  7. Turn on lamp

Have fun!

Tags

ikealampshadeklabb