Sprinter Dash Switch Trims (VS30 / W907)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Switch panel trim parts that match the curve of the OEM parts, and click-lock into the OEM panel.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
About
These switch panel blanks fit very well in a Mercedes Sprinter VS30 / W907 OEM panel, to add additional switches to your van with a clean look. Their key design value is the spring/locking mechanism which is similar to OEM Mercedes panel switches: they lock into the panel the same way.
I've used them to add controls for off-road lights, a compressor, and a LPAD dial to fix the sound problems from the center dash speaker.
Blanks are also included for the middle and edge positions in case you want to make a custom part. Modify the blanks with the cutout you need for whatever you are mounting.
Center Speaker L-PAD
The Sprinter center dashboard speaker is notoriously terrible for music. I believe this is because it is designed for voice/phone (and emergency) use, and not as part of the music/stereo sound system. The center speaker is actually really nice when listening to podcasts, rather than music. Therefore I designed a solution with an L-PAD to tune the speaker up or down, depending on what I'm listening to. This way it remains connected and available for when I want it, or not. For the L-PAD, here's the part I used: https://www.amazon.com/gp/product/B0002KR1EQ/
There are special wrench and nob parts in the parts list for use with this specific L-PAD.
Print Guidance
Choose ASA, PETG, PC, or something high-temperature. Avoid PLA: it will melt or deform in the van on a warm day.
When 3D printing any of switch panel parts, use supports on the flexible "spring" fingers. Enable supports on the build plate.