1 / 3
Door Stoper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A large and sturdy door stop for front doors.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- GNU General Public License v2.0
This model is designed for outdoor installation to secure heavy entrance doors. The stop is mounted on an M6x10 bolt anchored in the ground, with an additional positioning foot. I recommend printing the main body from PA6-GF and the 1.5 cm section from TPU 95A. Use a 35% gyroid infill for the PA and 5% for the TPU to provide cushioning. The print does not require supports. Orient it on the shorter side and position the limiting pin at the top. You can print it using MMU/INDX or cut the model and attach the rubber buffer separately.