120 mm desk fan based on Arctic S12038-8K with integrated PWM controller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
8,000 RPM Arctic fan with 8-nozzle airflow amplifier, reinforced suction-cup base, and motor-cooling intake.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 48
- Makes
- 0
- Views
- 343
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the high-performance, high-noise version of my desk fan — designed around the Arctic S12038-8K, an 120 mm industrial fan running at up to 8,000 RPM. Compared to the Noctua-based versions, this thing is in a completely different league: massive airflow, massive pressure, and massive noise.
The base has been redesigned to handle the considerably higher forces and vibration of the S12038-8K. It now features integrated suction cups, keeping the fan firmly anchored to the desk instead of allowing it to slowly migrate across the table — or, at full speed, attempt a short flight. The base features mounting holes for M4 heat-set inserts, allowing the suction cups to be securely screwed into the base. The larger housing now also allows the potentiometer knob to be positioned centrally in the base, as originally requested by a friend. This gives the base a more balanced and symmetrical appearance.
This design of the airflow amplifier is inspired by of Noctua's original design and a remix of the files by nhchiu and Dmytro. Compared to the Noctua version, the amplifier now uses eight instead of four stators, creating more but narrower airflow channels. The overall outlet area has been reduced, while the nozzles have been made longer, with the aim of producing more concentrated and higher-velocity air streams.
The intake has also been redesigned specifically for the S12038-8K. The fan features an additional impeller inside the hub that actively cools the motor, which is particularly important at the fan's extreme operating speeds of up to 8,000 RPM. The additional openings in the intake cone are designed to provide this hub-mounted cooling impeller some fresh air, enableing the motor cooling system during high-speed operation.
There was no CFD simulation or other detailed airflow analysis behind these changes. The geometry is based on practical considerations and a fair amount of educated guessing — essentially an attempt to make use of the much higher airflow and pressure potential of the S12038-8K. So consider this version an experimental high-performance design rather than a scientifically optimized one.
For assembly, you will need a few screws, nuts, and washers, as well as the PWM control board, a DC power jack, and a 12 V power supply. The fan uses a lot of power, so you'll need a power supply with at least 3 A!
A word of warning
The Arctic S12038-8K is extremely powerful and extremely loud. At full speed, this is closer to a small industrial blower than a conventional desktop fan. This version is intended primarily as a fun high-performance experiment for anyone who wants to find out what happens when you put an 8,000 RPM industrial fan on an desk fan.
Use appropriate caution around loose objects, dust, paper and anything else you don't want accelerated to warp speed. 😄
Safety warning: Never put your fingers or any other objects into the fan while it is running. Keep loose clothing, cables, hair, and other objects away from the intake and rotating parts. The fan can cause serious injury or damage objects at high speed.