1 / 4
Tiki Monster Vitamin Holder - part 1 - MULTICOLOR - 7 colors — image 1
1 / 4

Tiki Monster Vitamin Holder - part 1 - MULTICOLOR - 7 colors

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a small holder. You can open it up by turning the pieces in the right position by following the pattern!

Rating
0 / 5
Likes
2
Downloads
1
Makes
0
Views
22
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

This puzzle series is created especially for kids to help them accept vitamins or medicines in a happy and playful way. It can also be used to hold other things, such as sweets, chocolates, gummies or treats. If you can solve this easy puzzle, you can get whatever is inside. There are five different designs, so young people can choose their favourite. This is the third Tiki and it's free to download!

Get all five Tiki monsters here: https://cults3d.com/en/3d-model/game/tiki-monster-vitamin-holder-5-type

This toy is recommended for children aged 3 and over.

Watch them in action here: https://youtu.be/MA349pQ3uB8

ABOUT PAINTING

The painting process is straightforward, but some parts require more attention and patience. I use acrylic paints that dry quickly, are easy to handle and stick well to the PLA surface.

3D printing settings

The printing process is very easy, with the whole Tiki able to be printed at once, and no assembly or supports needed. The most important part is the first layer – if the levelling setup is correct, everything will be fine.

The bottom and the two top parts are printed separately. The average printing time is around 2 hours and 15 minutes with a layer height of 0.2 mm on a Prusa MK2.

IMPORTANT: After printing, please sand down any sharp edges and print with polypropylene filament if possible!

Tags