2D Print drying hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Peg up your prints for drying.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I designed this hanger to dry 2D prints including Lino. Lithograph, potato or any kind of 2D print technique. Works well with A3 (portrait), A4, A5 and A6 (landscape) paper sizes.
I could get 5 on a Core One bed. Mine are PLA 0.2mm speed. I have found there are varied widths of pegs and I have included 9mm wide peg version and a 10mm wide peg version.
The pegs are inserted into the provided slots and glued in place with superglue.
Hang your prints on a knotted line. The knots separate the prints, so they don't touch or stick to each other. I include a knot spacer model to help knot the same distance between knots. see the video above. I used a 3mm thick nylon braided cord and an awl help tighten the knots. You could use any 3mm cord like paracord and any pointy tool.