Quick and Easy Kombucha Strainer
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.57 – €1.91 net (excluding VAT)
For file: Strainer_0.2mm_PLA_MK3S_1h55m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.74 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.92 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Used to filter out the SCOBY pieces from fermenting prior to drinking
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 3
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Made using a gyroid modifier in prusa slicer as the strainer.
Use the 3MF file as a project but if you want to make your own tweaks this model needs a support in the middle to hold up the cone in the center. A Mesh modifier needs to be made for the center section with no perimeters or top or bottom layers so the gyroid shows up.