1 / 3
Globber Scooter Foot Rest
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Foot Rest for the 3 in 1 Goobler Scooter.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Globber Scooter Foot Rest
Foot Rest for the 3 in 1 Globber Scooter.
Assembly Lower Sit position
Remove the sit area of the scooter.
Slide in the assembly bar the 3D printed foot rest
Mount the scooter sit
Use the official screws to attach the sit. ( These will hold the foot rest in position as well as the sit area)
Assembly Higher Sit position
print the "Globber_snap_support_high_position"
With the sit removed, slide the part inside the cylinder
Snap the two pins in the lower position wholes to secure the pars
A M3x12mm screw and hex can be used for extra securing the part ( not needed)
No supports needed:
