1 / 15
SlimeVR Slimecon screw mount alternative case — image 1
1 / 15

SlimeVR Slimecon screw mount alternative case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a personal project alternative shell for a 3rd party set of VR body trackers for the SlimeVR community

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
35
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

This was a personal project for my 3rd party SlimeVR body trackers made the individual that goes by strnadik on the official discord server marketplace.

The goal was to make my slimes compatible with the body straps I already had from EOZ that utilize 1/4 inch screws to mount the trackers. I also wanted it to be a toyetic design I would be happy with. I believe I did a pretty good job with that. I spent at most 10 hours across multiple sessions in tinkercad to make this model and for me it works quite well. Both mounting the slime trackers to my body and removing them from the straps for charging is easy and convenient.

The hardware list is as follows:

• 3mmx6mm screws x5

• 1/4 threaded insert (mine were 12.7mm long but shorter ones should still be fine) x1

• craft foam sheet (will need to be cut to size, I had to layer 2 together for proper support) x1

To install the threaded insert into the knob I recommend to lower your iron's temperature to 110°-120° C for slower installation. It may take longer but it looks better and warps the plastic less, which is important because the wall thickness is less than what the manufacturer for my set of inserts recommends.

As for the craft foam, two sets of squares supporting the board should be ideal, although note not to cover the charging board LEDs so that they are still visible after assembly.

If you're interested at all in the project I recommend checking it out! Here is the link to strnadik's GitHub for information on the project:

https://github.com/strnadik/SlimeVR-SlimeCon

Tags