Portable White Board Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Want to carry whiteboard markers with an eraser on the go? This clean case will be your helpful study buddy!
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 9
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
This box will hold 4 Expo Markers and a custom washable white board eraser! (The eraser can be any eraser that is 121mm x 56mm x 39mm) Enjoy carrying this kit to study sessions, classes, meetings, and more! For the kit, you only have to print the box and lid.
Optional, but highly recommended equipment for eraser: Laser Engraver
Extra material for the whiteboard eraser: 59mm x 10mm x 2.5mm magnet, and a sheet of felt.
Instructions for the white board eraser:
Step 0: Either use a laser engraver (preferred method) using the .dxf file that's provided or cut out (using the felt section template) the felt section.
Step 1: print out all of the parts. (Main Handle, two P2 parts, two P3 parts, four small screws, six big screw, and a piece of felt.)
Step 2: Screw in all four parts ( two P2 and two P3) into the felt section using the small screws. The rounded edge should face towards the center of the felt. (Make sure you screw in the P2 parts into the P3 parts.)
Step 3 (Optional): Glue in a 59mm x 10mm x 2.5mm magnet into the handle.
Step 4: Line up the brackets and screw in the big screws into the handle.
You are now done! Just unscrew the six big screws to wash the felt. Have fun customizing it! :D
