Wireless Cabinet Lighting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This light controller is designed to control the lighting in kitchen cabinets. I didn't like the lighting ikea…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This light controller is designed to control the lighting in kitchen cabinets. I didn't like the lighting ikea designed to work with their cabinets and it was way too expensive. I created this one because I wanted the controller to be mounted on a wall in the kitchen that was not near the cabinets. My cabinets are not all connected and I wanted the lighting to be synced across all of them. The controller on the wall sends commands to each receiver on top of the cabinets. I put outlets on top of each cabinet to plug the power supplies into and ran the wires for the LED strips down behind them. It supports three lighting zones that can be controlled independently. I installed mine over cabinet, in cabinet and under cabinet. There are 4 brightness levels that can be set. In the future I want to make a controller that fits inside a standard wall outlet box.
Controller:
Arduino Nano
NRF24L01+ 2.4G Wireless Transceiver
10x 6x6x4.5mm buttons
Small AC-DC power converter
10k Ohm resistor
An assortment of wires
Receiver:
Arduino Nano
NRF24L01+ 2.4G Wireless Transceiver
3x Mosfet
12v white LED strips
Female 5mm power jack
12v power supply with 5mm power jack
An assortment of wires
Code: https://github.com/WittyGerbil/remote-lighting
Print Settings
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
any PLA
Category: Household