1 / 14
Toyota Supra MK4 JZA80 – Moving Wheels – 1:18 / 1:24 / 1:64 — image 1
1 / 14

Toyota Supra MK4 JZA80 – Moving Wheels – 1:18 / 1:24 / 1:64

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Printable Toyota Supra MK4 in three scales with separate rims, TPU tires and screw-mounted moving wheels.

Rating
5 / 5
Likes
39
Downloads
112
Makes
1
Views
684
Reviews
1

Updated at source:

Model information

Category
Vehicles
License
Standard Digital File License

The Toyota Supra MK4 JZA80 is one of the most recognizable Japanese performance cars ever created. This printable interpretation preserves its characteristic long bonnet, rounded body shape, large rear spoiler, muscular rear section and classic five-spoke wheels.

The model was designed primarily for FDM printing. It has no interior or opening body panels, allowing the body, simplified closed underbody and reinforced wheel-mounting tubes to form a strong, printable assembly. The wheels are mounted with metal screws and rotate freely.

Perfect for:

  • fans of Japanese and JDM cars;

  • collectors of printable scale vehicles;

  • automotive display models;

  • painting and customization projects;

  • anyone looking for a printable car with functional moving wheels.

Model features:

  • recognizable Toyota Supra MK4 JZA80 proportions;

  • body and simplified closed underbody combined into one printable part;

  • shortened underbody with chamfered front, rear and side edges;

  • separate front and rear rims;

  • separate front and rear tires;

  • separate wheel center caps;

  • functional moving wheels;

  • screw-mounted wheel system;

  • two reinforced full-width axle tubes connecting the left and right sides;

  • deeper screw-head pockets hidden underneath the wheel caps;

  • closed doors, bonnet and trunk;

  • no interior;

  • large, reinforced rear spoiler;

  • wheels positioned within the body outline;

  • no supports required underneath the central floor section.

Available scales:

  • 1:18 – uses M3 screws;

  • 1:24 – uses M2 screws;

  • 1:64 – uses M1.6 screws and reinforced small-scale wheel components.

For the best wheel movement, use screws with a smooth, unthreaded section directly below the head. The threaded section should secure the wheel without pressing it tightly against the body.

What’s included in each scale:

  • 1× Body with integrated closed underbody and reinforced axle tubes;

  • 1× Front Rim STL – print two copies;

  • 1× Rear Rim STL – print two copies;

  • 1× Front Tire STL – print two copies;

  • 1× Rear Tire STL – print two copies;

  • 1× Wheel Cap STL – print four copies.

Important – tap the Body before installing the wheels

Before installing the wheels, the mounting channels in the Body must be tapped using the correct tap for the selected scale:

  • 1:18 scale – M3;

  • 1:24 scale – M2;

  • 1:64 scale – M1.6.

Thread each end of the axle tube separately. It is not necessary to run the tap through the entire width of the car.

Do not drive the screws directly into the untapped Body, as this may damage or crack the print. Cut the threads slowly by hand and keep the tap aligned with the wheel-mounting channel.

After tapping, install the wheels and tighten the screws only enough to hold them in place while allowing them to rotate freely. Fit the wheel caps after confirming that all four wheels rotate correctly.

Metal screws and taps are not included.

Printing recommendation:

  • Technology: FDM recommended;

  • Body orientation: flat, chamfered underbody placed on the build plate;

  • Body and rims: PLA or PETG;

  • Tires: TPU 85A is strongly recommended for soft, flexible and more realistic tires;

  • Rims, tires and wheel caps: print separately, on their sides;

  • Supports: organic supports from the build plate may be required underneath the mirrors, rear spoiler and selected bumper sections;

  • Do not generate supports inside the axle channels or underneath the central floor section;

  • Layer height: 0.10–0.20 mm depending on scale and desired detail;

  • Nozzle: designed with a 0.4 mm nozzle in mind; a 0.25 mm nozzle is recommended for the finest details in the 1:64 version;

  • Fit: print one rim, tire and wheel cap before producing the complete wheel set.

TPU 85A is a very soft material, so print the tires slowly and use a filament path suitable for flexible materials. A firmer TPU can be used if your printer cannot reliably handle 85A, but TPU 85A provides the preferred result.

The 1:24 version has been successfully printed, assembled and physically tested. The completed model rolls correctly on all four wheels. The 1:18 and 1:64 versions were adapted separately with scale-appropriate screw mounts, clearances and reinforced small details.

Share your print!

If you print this model, please upload a Make with photos of your finished Supra. Your photos help verify different materials, slicer settings and color combinations—and they also help other makers with their own prints.

Comments, assembly feedback and suggestions are very welcome.

What’s next?

The next car joining the moving-wheels collection will be the:

Porsche 911 GT3 RS

What car should be created after the Porsche? Leave your suggestion in the comments. The most interesting and popular ideas will be considered for future models.

Tags