ESP32 Honeycomb Case - Push together, no hardware/tools required!
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.14 – €1.40 net (excluding VAT)
For file: ESP32_Honeycomb_Case_0.4n_0.2mm_PLA_MK4SMMU3_1h10m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.27 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.17 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A case for your ESP32 Dev Kit. Designed to fit the ELEGOO ESP32 DEVKIT1, probably fits others.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 21
- Makes
- 1
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I made this case to hold an ESP32 DEVKIT1 (which I used to hold a Wi-Fi/BLE Surveyor)
Recommended print settings:
Material: PLA
Layer Height: 0.20
Infill % : 15+
Supports: No
Print Orientation: Default as modeled
Features:
No hardware required
Board slides into the bottom, aligned by vertical pins
Top slides over
Notch allows connecting a USB C connector
To assemble:
Start with the bottom.
Insert the ESP32 - it should fit quite snug! The bottom is symmetrical, so either direction works.
Slide the top over the bottom - orient the notch toward the USB connector.
The top can be removed without unplugging the USB connection:
