LDO Leviathan + Ext Extrusion Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To mount the Leviathan with Extension Board to extrusions
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Tried to follow the design language of the mount itself.
Didn't want to finick around with dealing with the small clips for the universal brackets so I designed this. Designed to fit in a K3, which it does, barely.
You would also need a build plate of at least 270mm to print it out in one piece.
Requires:
7xM3 heat set inserts
4xM5x8 bolts (and their corresponding t-nuts) to attach to extrusions
Recommend printing with brim or with generous amounts of adhesive of your choosing due to it's large and flat nature.
Installation guide:
Install it on the extrusion BEFORE attaching the Leviathan with M3 bolts. I used M5 socket heads, and if you are going to as well, a 4mm ball hex driver is recommended. The bolts might not seem like it would fit, but just push it with some pressure and it'll sit in there.
If you are attaching it on a K3 like I am, you would probably need to remove a bolt from the topmost fan from each side.