1 / 2
TRX 4 1:10 Scale Recovery Boards / Traction Boards — image 1
1 / 2

TRX 4 1:10 Scale Recovery Boards / Traction Boards

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Designed for scale RC adventures, these recovery boards are an essential accessory when your RC car gets stuck

Rating
5 / 5
Likes
1
Downloads
10
Makes
1
Views
59
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

RC Scale Revery Boards / Traction Boards

Designed for scale RC adventures, these recovery boards are an essential accessory when your RC car gets stuck in sand, mud, or tricky off-road terrain. Whether you need to slide them under your tires for a scale rescue or mount them as a realistic cosmetic detail on your roof rack, these boards deliver both high functionality and rugged durability.


Key Features & Design

  • Support-Free Printing: The model is intelligently split into two separate halves that print flat on your build plate. Neither half requires supports, ensuring a clean, easy print and hassle-free post-processing.

  • Dual-Sided Grip: By joining the two halves back-to-back, the aggressive tread pattern and teeth face outward on both sides. This ensures the boards bite firmly into both the RC tire tread and the loose ground below.

  • Superior Strength & Stability: Gluing the two halves together drastically increases resistance to bending and overall structural rigidity. This makes the boards significantly more robust, stable, and capable of handling real-world trail recovery stress without snapping.

Dimensions & Specifications

  • Length: 210 mm

  • Width: 45 mm

  • Body Thickness (Post-Assembly): 8 mm

  • Total Thickness (Including Teeth): ~12.5 mm

Recommended Print Settings

  • Walls (Perimeters): 2 walls

  • Top & Bottom Layers: Maximize the number of top and bottom layers so that they overlap and meet in the middle. This creates a dense, solid cross-section throughout the part rather than using a standard sparse infill, maximizing bending resistance and rigidity.

  • Material: PETG, ABS, or PLA (PETG or ABS recommended for extra toughness).

Assembly Instructions

  1. Print both halves using the recommended settings above.

  2. Clean any first-layer imperfections if necessary to ensure a flush fit.

  3. Apply standard cyanoacrylate (CA glue / super glue) evenly across the inner mating surfaces of the two halves.

  4. Press them firmly together and hold until the bond sets. Once cured, your heavy-duty, double-sided recovery board is ready for the trail!

Tags