1 / 2
TRX 4 1:10 Scale Recovery Boards / Traction Boards — zdjęcie 1
1 / 2

TRX 4 1:10 Scale Recovery Boards / Traction Boards

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed for scale RC adventures, these recovery boards are an essential accessory when your RC car gets stuck

Ocena
5 / 5
Polubienia
1
Pobrania
10
Wydruki
1
Wyświetlenia
59
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

RC Scale Revery Boards / Traction Boards

Designed for scale RC adventures, these recovery boards are an essential accessory when your RC car gets stuck in sand, mud, or tricky off-road terrain. Whether you need to slide them under your tires for a scale rescue or mount them as a realistic cosmetic detail on your roof rack, these boards deliver both high functionality and rugged durability.


Key Features & Design

  • Support-Free Printing: The model is intelligently split into two separate halves that print flat on your build plate. Neither half requires supports, ensuring a clean, easy print and hassle-free post-processing.

  • Dual-Sided Grip: By joining the two halves back-to-back, the aggressive tread pattern and teeth face outward on both sides. This ensures the boards bite firmly into both the RC tire tread and the loose ground below.

  • Superior Strength & Stability: Gluing the two halves together drastically increases resistance to bending and overall structural rigidity. This makes the boards significantly more robust, stable, and capable of handling real-world trail recovery stress without snapping.

Dimensions & Specifications

  • Length: 210 mm

  • Width: 45 mm

  • Body Thickness (Post-Assembly): 8 mm

  • Total Thickness (Including Teeth): ~12.5 mm

Recommended Print Settings

  • Walls (Perimeters): 2 walls

  • Top & Bottom Layers: Maximize the number of top and bottom layers so that they overlap and meet in the middle. This creates a dense, solid cross-section throughout the part rather than using a standard sparse infill, maximizing bending resistance and rigidity.

  • Material: PETG, ABS, or PLA (PETG or ABS recommended for extra toughness).

Assembly Instructions

  1. Print both halves using the recommended settings above.

  2. Clean any first-layer imperfections if necessary to ensure a flush fit.

  3. Apply standard cyanoacrylate (CA glue / super glue) evenly across the inner mating surfaces of the two halves.

  4. Press them firmly together and hold until the bond sets. Once cured, your heavy-duty, double-sided recovery board is ready for the trail!

Tagi