M3 Blaze X Window Exhaust Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printed adapter connecting the M3 Blaze X laser exhaust port to a 4" dryer vent hose. Skip the factory filter add-on.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 49
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Overview:
The Atomstack M3 Blaze X includes an amber acrylic safety enclosure, which works well. What it doesn't include is a way to route smoke and fumes out of your workspace. Atomstack offers a proprietary filtration system as an add-on purchase, but you can achieve the same result with a standard 4" aluminum dryer vent hose and a portable AC window vent kit at a fraction of the cost.
This adapter bridges the gap between the machine's rear exhaust port and standard 4" ventilation tubing.
What This Is:
A 3D-printed adapter that installs into the rear exhaust port of the M3 Blaze X. It locks onto the internal lips where the factory cooling fan is mounted. The opposite end accepts a standard 4" flexible aluminum dryer vent hose. Connect that hose to a portable AC window vent kit to route fumes directly outside — no filter cartridges to replace, no proprietary hardware, no ongoing costs.
Installation Steps:
Seat the adapter into the rear exhaust port, snapping onto the internal lips around the factory fan
Attach a 4" dryer vent hose to the adapter outlet (82mm ID)
Route the hose through a portable AC window vent kit to the outdoors
Secure all connections with foil tape or hose clamps
Factory fan moves air through the adapter and out the hose
Critical Measurements:
Internal circle diameter (fan mount): 35.00 mm
Large lip width: 5.85 mm
Thin lip width: 3.35 mm
Space between small areas: 36.07 mm
Lip length (straight, approx): 27.60 mm
Lip depth (plastic thickness): 2.97 mm
Rear clearance behind machine: 3+ inches
Dryer hose outer diameter: 84.81 mm
Dryer hose inner diameter: 82.00 mm
Note: The port has curvature that prevented some direct caliper measurements. The adapter is designed to seat on the internal lips where the fan mounts.
Materials Needed (Beyond the Print):
4" flexible aluminum dryer vent hose (any hardware store)
Portable AC window vent kit (available at retailers like Amazon, Walmart)
Foil tape or hose clamp for secure connections
Print Settings:
Material: PETG or ASA (heat resistant)
Layer height: 0.2mm
Infill: 20%+
Supports: Yes — overhangs on the hose-facing end
Wall count: 3 minimum for airtight seal