1 / 5
M3 Blaze X Window Exhaust Adapter — zdjęcie 1
1 / 5

M3 Blaze X Window Exhaust Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D-printed adapter connecting the M3 Blaze X laser exhaust port to a 4" dryer vent hose. Skip the factory filter add-on.

Ocena
0 / 5
Polubienia
1
Pobrania
49
Wydruki
0
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Overview:

The Atomstack M3 Blaze X includes an amber acrylic safety enclosure, which works well. What it doesn't include is a way to route smoke and fumes out of your workspace. Atomstack offers a proprietary filtration system as an add-on purchase, but you can achieve the same result with a standard 4" aluminum dryer vent hose and a portable AC window vent kit at a fraction of the cost.

This adapter bridges the gap between the machine's rear exhaust port and standard 4" ventilation tubing.

What This Is:

A 3D-printed adapter that installs into the rear exhaust port of the M3 Blaze X. It locks onto the internal lips where the factory cooling fan is mounted. The opposite end accepts a standard 4" flexible aluminum dryer vent hose. Connect that hose to a portable AC window vent kit to route fumes directly outside — no filter cartridges to replace, no proprietary hardware, no ongoing costs.

Installation Steps:

  1. Seat the adapter into the rear exhaust port, snapping onto the internal lips around the factory fan

  2. Attach a 4" dryer vent hose to the adapter outlet (82mm ID)

  3. Route the hose through a portable AC window vent kit to the outdoors

  4. Secure all connections with foil tape or hose clamps

  5. Factory fan moves air through the adapter and out the hose

Critical Measurements:

  • Internal circle diameter (fan mount): 35.00 mm

  • Large lip width: 5.85 mm

  • Thin lip width: 3.35 mm

  • Space between small areas: 36.07 mm

  • Lip length (straight, approx): 27.60 mm

  • Lip depth (plastic thickness): 2.97 mm

  • Rear clearance behind machine: 3+ inches

  • Dryer hose outer diameter: 84.81 mm

  • Dryer hose inner diameter: 82.00 mm

Note: The port has curvature that prevented some direct caliper measurements. The adapter is designed to seat on the internal lips where the fan mounts.

Materials Needed (Beyond the Print):

  • 4" flexible aluminum dryer vent hose (any hardware store)

  • Portable AC window vent kit (available at retailers like Amazon, Walmart)

  • Foil tape or hose clamp for secure connections

Print Settings:

  • Material: PETG or ASA (heat resistant)

  • Layer height: 0.2mm

  • Infill: 20%+

  • Supports: Yes — overhangs on the hose-facing end

  • Wall count: 3 minimum for airtight seal

Tagi