Custom d12 — a fair gaming die and a spindown counter, 18 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An 18 mm d12 in two numberings: a fair gaming die (opposite faces sum to 13), and a spindown counter.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Custom d12 — a fair gaming die and a spindown counter
An 18 mm twelve-sided die in two different numberings, printed from the same body. 18 mm across the flats, sits flat on a whole pentagon, no supports and no brim.
Two numberings
file | what it is |
| fair gaming die — opposite faces sum to 13, every numeral apex-up so it reads like a commercial d12 |
| counter — 1…12 walk a path around the solid so that n and n+1 always share an edge |
One quarter-turn of the spindown die moves you exactly one step, which is what you want for tracking life, wounds, rounds or charges. It is deliberately not fair, and a die cannot be both: a consecutive chain and a sum-to-13 pairing cannot hold at the same time.
6, 9 and 10 are underlined
A pentagon has no canonical "up". Turned 180° in its own plane a 6 reads as a 9, and a 10 reads as a 1 — and all four of those values are on this die. Those three numerals carry an underline so the reading is never ambiguous. 11 turns into itself and 12 turns into nothing that is on the die, so neither needs one.
The pair mark
Two identical d12 are what dual-roll systems ask for, and two identical d12 are also impossible to tell apart once they are on the table. The _marked_ files are the same standard numbering with a small ring under every numeral, cut from the same ink as the numerals, so it costs no extra colour change. Print one plain die and one marked die and "which die was higher" is answerable from across the table, or from a photo.
The numerals are the same size on both dice — the plain die reserves the ring's space even though it does not use it, so a matched pair does not come out at two type sizes.
Which files to print
Single colour — print just the
_bodyfile for the numbering you want. The numerals are crisp recesses ready for acrylic paint-fill: flood the recess and wipe the face flat with a card before it dries.Two colour (AMS) — print the
_bodyand matching_plugsfile together. Select both at import and answer Yes to "load as a single object with multiple parts", then assign one filament to the body and one to the plugs.
Do not use "Split to Parts" on these. An arabic inlay is ~14 separate glyph islands, and Split divides by connected component — it would hand you fourteen pieces to assign a filament to, one at a time.
Both filaments must be the same polymer — PLA+PLA or PETG+PETG. PLA against PETG is a deliberate breakaway interface; the numerals would pop out.
The two-colour die is the fairer one
Filling the pockets flush with a second colour of the same polymer puts back exactly the material the engraving removed. body + plugs measures against the un-engraved solid to 0.00 mm³ — the two-colour die is a solid dodecahedron again. It is the same thing casino dice do by filling their pips with flush paint.
Print settings
18 mm across the flats, any pentagon on the bed. 0.2 mm layers, no supports, no brim.
Infill 40 % minimum, 100 % for a die you actually roll. Uneven infill is what makes a printed die roll badly — gyroid at 40 % leaves a different amount of plastic behind each face.
~5 g of filament per die.
Turn ironing off on the two-colour version — it drags one colour across the other on the flush inlays.
Two-colour purge dwarfs the die: numerals on all twelve faces means a colour change on nearly every layer. The purge is per plate, not per die — print a whole set at once and it costs the same as printing one.
Colour choice
Pick two filaments far apart in brightness, not just in hue. The photographed die is black with a pale yellow-green ink, which reads at arm's length under warm light. Two colours of similar value look fine in the hand and lose their contrast on the shadowed faces.
The source is included
The .scad is attached and everything is a named variable at the top: change the size, switch the numerals to roman, turn the pair mark on or off, or swap the underline set.
