Prototyping Stand - Project, Solar, Screen or anything Flat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small stand to angle items for project work, to make it easier to see, work on or use.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 1
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
A nice stand for project work. there is a cutout at the back to allow wires to run from the middle of the held item.
Ideal for a solar panel, small screen or other flat item. We use it to hold a solar panel.
It doesn't take up too much room, and is fairly stable.
Print Settings
Walls - 2 or 3 depending on strength needed
Infil - 15% cubic
Material: Best suited to your needs
Orientation: Print on its side for best strength
The item in the photos is printed in orange Uzy PLA Pro. But, any material will work.
If you need a larger size, just ask and I will update the model.