Easy Composites TBC2 Through-Bag Connector Square Socket Wrench
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Through-Bag Connector Square Socket Wrench
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Standard Digital File License
A custom 3D-printed socket tool designed to snugly fit the outer profile of the Easy Composites TBC2 Through-Bag Connector. This square-profile socket provides maximum grip and leverage to easily loosen over-tightened connectors and VC200 Quick-Release Vacuum Couplings without slipping, stripping the ribs, or scratching the anodized finish.
Print Settings
Material: PETG (recommended for impact resistance and layer adhesion under torsional torque)
Wall / Perimeters: 3 walls minimum (4 recommended for high stress)
Infill: 60%
Infill Pattern: Gyroid or Cubic (provides uniform strength against twisting forces)
Supports: No supports needed
Layer Height: 0.2 mm
Usage Instructions
Place the square socket over the top of the TBC2 Through-Bag Connector so the internal contour aligns with the outer ribs.
Hold the square outer body firmly with your hand (or use an adjustable wrench if extra leverage is needed) while twisting off the quick release coupling.
For maximum stability, you can clamp the square outer profile directly into a workbench vise to keep the tool stationary while loosening tight connectors.
If you wish to sell physical prints of this model, please contact me directly via private message here on Printables or email at
[email protected]to arrange a commercial agreement.