Articulated Ferret, Print in Place Fidget
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print in place articulated Ferret fidget, no supports needed. Choose cream or cinnamon, single or AMS colour.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 105
- Makes
- 1
- Views
- 247
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Standard Digital File License
This fully articulated ferret prints instantly and requires no assembly. Each joint pops right off the bed, ready to twist, curl and wiggle just like a real ferret. The segmented body allows it to coil up on a desk or drape over a monitor edge. It’s a lovely choice for wildlife enthusiasts, fidgety hands needing something to hold or anyone curious about print-in-place mechanisms.
Give the model a gentle wiggle while it’s still warm from the bed to loosen the joints. Available in two colourways – soft cream and warm cinnamon rust – you could print one of each and display them together like in the photos or build a little ferret family over time. It’s also a sweet, low-cost gift for animal lovers and a great small test print for experimenting with AMS colour swaps to create subtle shading along the body.
Filament Colour & Material
PLA is the way to go here. It holds the joints crisp and keeps them free moving, whereas PETG's extra stringing can weld print in place segments together. A soft cream or ivory suits the pale ferret colouring, while a warm cinnamon or rust brown matches the sable tone shown in the photos.
Print Settings
Print in place, no supports
Wall line count: 2 or more
Infill: 15%
Layer height: 0.16mm
Line width: 0.6mm (default, initial, and outer walls)
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: