Quick Print Makita DC18RC Charger Ikea Skadis Pegboard holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A strong but quick to print holder for the Makita 18V Charger.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Notes:
Due to the asymmetric position of the feet, you need to print the "holder-right" with a small support on the peg that's otherwise in the air.
Paint-on supports work best so you don't get support meterial inside the hollow pegs.
PLA is fine.
This print orientation is the strongest option. Don't worry of you get small lengthwise cracks in the hollow pegs where the material is thin, it won't really affect strength.
Use at least 4 perimeters (with 0.4 mm nozzle).
Pull out the rubber feet from the charger and undo the screws. Insert the part and re-fasten the screws.