Hobie Fish Finder Transducer Mount for Garmin Striker Plus 4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic mount for a Garmin Striker Plus 4 transducer to my Hobie Pro Angler 14 and maybe others.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
This is a model I hacked at in tinkercad to allow a Garmin Striker Plus 4 transducer to mount to the hull of my Hobie Pro Angler 14. The model allows for four 8x3mm N52 magnets to be glued in, allowing the transducer to stay securely in place, while also allowing it to be easily pushed into the cavity if it collides with anything. It will also re-align itself after the obstruction is moved. The design also allows for the attachment of a 4mm rope through the four holes with the bumped up reinforcement and recessed cavity below. The rope can be routed up through the hole in the hull and used to manually pull the transducer up and secure it out of the way for transport. The transducer is attached to the plate with five M4x14 cap head screws, I reused the screws that were in my hull for the hull side attachment.
I printed mine in PETG with 6 walls, 4 top/bottom layers, 25% infill. It would probably be best in ABS or ASA if you can get it to print correctly. Both models need supports. The magnets are secured to the print with J-B Weld Original Cold-Weld Steel Reinforced Epoxy. The magnets I used claimed a 3.8lbs holding force to a steel plate for the 8x3mm size, you could probably get away with going down to N42 or maybe even N35 if you want to save some money or have them on hand.
Note: The original that I remixed actually has a .f3d file if anybody wants to properly remix, unlike this monstrosity. It does work though :D