Mini RS50 Compact FFB Wheelbase (FFbeast / OpenFFboard)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact, fully printed FFbeast/OpenFFboard hoverboard wheelbase with active cooling.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 112
- Makes
- 0
- Views
- 524
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for a hoverboard motor conversion using the FFbeast or OpenFFboard firmware with a MKS Odrive Mini controller. This is a compact, fully 3D printed enclosure that relies entirely on printed parts, standard bolts and nuts to hold the motor firmly in place. It features cooling with a full 120mm PC fan and an integrated USB-C hub for peripheral connections.
Key Features
Compact footprint
Fully 3D printed structure
Powerful active cooling
Bill of Materials (BOM)
Wheelbase Electronics & Assembly:
19x 35mm M4 socket head bolts + nuts
MKS Odrive Mini controller
120mm PC fan + 4x fan screws
LM2596 step-down module (to power the fan)
FE11SX4 USB hub board
4x 6-pin panel mount female USB-C ports
Male XT60 connector (reused from hoverboard)
Motor clamp (reused from hoverboard, or print one with high wall count)
2x 10mm M3 bolts + nuts
3x short 3mm wood screws (reused from hoverboard)
5x 5mm M2 screws
Table Clamp:
4x 35mm M4 socket head bolts + nuts
2x Cheap 3-inch C-clamps
Requires front magnetic encoder. Use Viih or Tig33r encoder mounts.
Printing in PETG is strongly recommended. I used ABS, but the large parts are prone to warping.
In the slicer, tune the "T" looking sections in the base pieces for high wall count. They are the structural pieces that hold the motor and need to be strong.