1 / 7
EE210 Penn State final project case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case I made for the EE210 final project
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
You will need some M3 screws and M3 heat inserts that are 5mm diameter and 4mm long. Print the top and bottom of the case and put the heat inserts into the holes. Then put the shell on and screw it together.
Note that I still have not designed the switch and switch cover yet. You will have to use a screwdriver to access the switch for now. The case is also not perfect. The pcb moves slightly in the case.
There are 3 files:
The top cover
The bottom cover
The placeholder for the PCB that I made