1 / 4
IPOTools X800A Welding Helmet - Headband Repair & Reinforcement Part — image 1
1 / 4

IPOTools X800A Welding Helmet - Headband Repair & Reinforcement Part

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fix and reinforce the broken headband on your Ipotools X800A welding helmet instead of buying a replacement.

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
124
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

IPOTools X800A Welding Helmet - Headband Repair & Reinforcement Part

Is the plastic headband of your Ipotools X800A welding helmet broken or cracking at its typical weak point? Instead of buying a completely new headband or helmet, this 3D printable reinforcement part helps you fix and strengthen the damaged section.

This part is designed to bridge and reinforce the weak point, restoring stability so you can get back to work safely.

Assembly & Fixation Options
  • Gluing (Tested): I initially fixed the part in place using superglue (cyanoacrylate) for a quick test. It holds up well for now, but long-term durability with superglue alone is still unconfirmed depending on the stress and plastic type.

  • Alternative Fixation (Recommended for high stress): For maximum strength and longevity, consider:

    • Using a strong 2-part epoxy adhesive

    • Bolting the part through the headband with small Woodscrews

    • Riveting the reinforcement onto the headband

Print Settings (Recommended)
  • Material: PCTG, PETG, or ABS/ASA recommended for impact resistance and flexibility. PLA can work for a quick fix, but might be too brittle over time.

  • Infill: 40% - 100% (use high infill or extra wall loops for maximum strength)

  • Layer Height: 0.2 mm

  • Walls/Perimeters/: 2 to 4 walls for better structural integrity

  • Supports: Not required

Feel free to leave feedback or share your fix in the Makes section!

Tags