Dice Extruder Visualizer for A1 mini and A1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Seven dice that spin with your extruder gear. Three mounting styles, plus a bore probe to dial in the fit.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Seven dice for the little round window on the extruder of the A1 mini: d4, d6, d8, d10, d12 and two d20s, one plain and one carrying my own mark. They sit on the gear shaft and turn with it while the printer feeds filament.
The coupling is printed and fitted on an A1 mini: 3.70 bore, 19.60 skirt, 4.20 tall.
A thing I have NOT confirmed, and I would rather say so:
- Whether the A1 takes it. It uses the same extruder assembly, so it should, but I only own the mini. If you have an A1, tell me and I will put it in the description.
SMALL, 19.60 mm across and 4.20 tall, around 1.35 g. Sits inside the window with the die in relief.
LARGE, 26.00 mm across and 9.60 tall, around 4.2 g.
OPEN, no back plate at all, 0.34 to 0.50 g. Just the die, cut through, so you see the gear turning through the gaps. Only the d10, the d12 and both d20s are in the pack in this style: on the d4, the d6 and the d8 the material needed around the bore has nowhere to hide and it reads as a patch instead of a feature. I would rather ship three fewer files than three bad ones.
Made by The Obsidian Die: printed props, boxes and accessories for roleplaying and card tables. More sets, most of them free, at theobsidiandie.com, and new releases at theobsidiandie.com/novedades