1 / 2
Prusa MMU2 thumbscrews for idler tensioning.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My MMU is in a pretty tight location and I can't easily get an allen key in there to adjust the idler tension.
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 463
- Makes
- 6
- Views
- 2,903
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
My MMU is in a pretty tight location and I can't easily get an allen key in there to adjust the idler tension. Here is a design for some thumbscrews that can be pushed onto 40mm M3 screws to adjust the tension without an allen key. They are a friction fit on the screws and will probably need to be tapped into place. There's a small step halfway along the cylinder to show about where "flush" would be with the original screws.
Can be printed big end down, without support.