Board Game Insert: Tiny Epic Galaxies + Beyond the Black expansion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Board game insert for Tiny Epic Galaxies with Beyond the Black expansion. No lid lift.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 3
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Basic info
Inner box dimensions: [167mm, 109mm, 36mm] - check this before printing
Lid lift: None.
Sleeves: No.
About the insert
This insert holds the Tiny Epic Galaxies base game plus Beyond the Black expansion in either of the base or expansion box. This was really tight with no chance of fitting sleeved cards. You also need to be a bit more careful about fitting player pieces to boxes so none of them stick out.
I don't own any of the mini expansions. Some of it might fit (there is still a bit of space around the big cards on top that could hold a very shallow box), but I wouldn't bet on it.
You can't fit all the expansion cards to the shorter card box. I recommend to put expansion planet cards to the taller card box, together with the base game cards. This will cause the shorter card box to be full, but not overflowing. If you move a few Secret objective cards from the expansion to the taller card box as well, you'll achieve a small amount of leeway (around 1mm) in both card boxes.
Big cards sit on top of the boxes. Rules go on the very top. There is no lid lift.
You'll need to print three TEG-player-box-3.stl boxes and one of each other boxes.
Insert is suitable for both vertical and horizontal storage, as long as you keep it shut.
Printing instructions
PLA / PETG
0.25mm layer hight
You absolutely need to add supports for the dice box. If you use the
.3mffile, the supports are already added.