Dual Nvidia RTX Pro 6000 Sever Edition Fan Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a fan shround used to cool two Nvidia RTX Pro 6000 server edition GPU's inside a PC Case.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Designed a fan shroud to cool my two Nvidia RTX Pro 6000 server edition GPU's as they are typically passively cooled in a server chassis.
Mounting: This model uses the two built in M3 mounting holes in the rear of the GPU. In this particular setup I used M3x10mm with a 2mm nylon washer inside the fan shroud. Installed before mounting the high static presure fans.
Fans: Two Silverstone FHS80X 12v fans @ 50.77mmH2O needed to cool the GPU. Custom PWM profile used after a 4h soak at 600W. These fans are not quiet but i run this headless in my garage so not an issue in my case.
Performance: At normal usage GPU balances at 45-50 deg @ 600W
Printing: Print as oriented no supports. I used PC-CF for high temp conditions. I have provided .step files so others can make improvements.