Dual Nvidia RTX Pro 6000 Sever Edition Fan Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fan shround used to cool two Nvidia RTX Pro 6000 server edition GPU's inside a PC Case.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Designed a fan shroud to cool my two Nvidia RTX Pro 6000 server edition GPU's as they are typically passively cooled in a server chassis.
Mounting: This model uses the two built in M3 mounting holes in the rear of the GPU. In this particular setup I used M3x10mm with a 2mm nylon washer inside the fan shroud. Installed before mounting the high static presure fans.
Fans: Two Silverstone FHS80X 12v fans @ 50.77mmH2O needed to cool the GPU. Custom PWM profile used after a 4h soak at 600W. These fans are not quiet but i run this headless in my garage so not an issue in my case.
Performance: At normal usage GPU balances at 45-50 deg @ 600W
Printing: Print as oriented no supports. I used PC-CF for high temp conditions. I have provided .step files so others can make improvements.