Parametric Subwoofer TPU Anti-Vibration Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Patas para Subwoofer para reducir la transmision de vibracion al suelo o superficie donde se encuentre.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
🔊 Parametric Subwoofer / Speaker TPU Anti-Vibration Feet
A custom-designed parametric isolation foot specially shaped to decouple subwoofers and heavy audio speakers from floors or furniture, eliminating low-frequency cabinet resonance and room rattling.
The design combines a solid mounting block with a hollow half-cylinder arch that acts as a natural spring/elastomer when printed in TPU.
---
✨ Features & Design Highlights:
• 100% Parametric (OpenSCAD): Easily customize width, depth, base height, and arch wall thickness in OpenSCAD or Printables Customizer.
• Optimized Arch Geometry: The hollow half-cylinder converts vertical resonance into controlled lateral flex.
• Mounting Flexibility: Designed for easy double-sided tape mounting (e.g., 3M VHB), avoiding any drilling into your subwoofer cabinet.
---
🖨 Recommended Print Settings (Optimized for TPU 95A):
• Material: TPU / Flexible Filament (TPU 95A recommended)
• Print Orientation: Print lying flat on its side profile — NO supports required!
• Perimeters / Walls: 3 walls (crucial so the arch remains elastic under load)
• Infill: 10% - 15% Gyroid or Cubic
• Layer Height: 0.2 mm
• Top / Bottom Shells: 4-5 Top Layers / 3-4 Bottom Layers
---
💡 Installation Tips:
1. Thoroughly clean both the TPU top surface and the bottom of your subwoofer cabinet with Isopropyl Alcohol (IPA) to remove any oily residues.
2. Apply high-strength double-sided tape (such as 3M VHB).
3. Align all 4 feet in the SAME direction for uniform load distribution and symmetrical deflection.