Chibi Bat — Halloween Figure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A round bat with its wings wrapped round itself and two big ears — and the cleanest print in the set.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Standard Digital File License
A round bat with its wings wrapped round itself and two big ears — and the cleanest print in the
set.
At 60 % scale it is 46.9 × 60.0 × 58.1 mm and about 28 g of PLA. Wings folded, fangs out, sitting
flat.
The photos are a real print of this file at 60 % scale, orange PLA, unpainted.
What is measured, not guessed
- The easiest print of the eight. Only 12.5 % of the surface is past 45° — the lowest in the series
— and the largest flat ceiling anywhere on the model is 0.13 cm², 7 mm across. There is nothing
here for a support to do.
- Watertight — zero open edges, zero non-manifold edges, one connected solid, 199 992 triangles.
- Ears are part of the body. They taper into the head rather than sticking out on a stalk, which is
why they print without support and do not snap off in a bag.
- Flat base 682 mm² at 60 %. Stands square, no brim.