ZeroG Mercury One Double Sheer Stepper Tower Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inserts for bottom stepper tower pieces allowing a 625zz bearing to be added for double sheer stepper configurations.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I have wanted to add double-sheer steppers to my Merc One.1 for a while, however I was only able to find inside frame models that have amendments. I have a Nebula, and have used the Nebula bottom towers - I did not want to remix and reprint the towers, so I modeled these inserts to go in the existing access holes in the bottom towers.
- Printed from ABS with ZeroG settings.
- Orientation - Tabs Down.
Printed from ABS with Zero G settings on 0.4mm nozzle.
Orientation - Tabs Down.
No supports no brim.
Press fit - verified fitment on Nebula Tower bottoms, have not tested on printer - waiting for LDO 2804HT S55 to come back into stock.
Requires 2 parts printed and 2 625zz bearings ( I stripped mine out of the old Ender V rollers - each one has two that press out from the center ).