ZeroG Mercury One Double Sheer Stepper Tower Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inserts for bottom stepper tower pieces allowing a 625zz bearing to be added for double sheer stepper configurations.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I have wanted to add double-sheer steppers to my Merc One.1 for a while, however I was only able to find inside frame models that have amendments. I have a Nebula, and have used the Nebula bottom towers - I did not want to remix and reprint the towers, so I modeled these inserts to go in the existing access holes in the bottom towers.
- Printed from ABS with ZeroG settings.
- Orientation - Tabs Down.
Printed from ABS with Zero G settings on 0.4mm nozzle.
Orientation - Tabs Down.
No supports no brim.
Press fit - verified fitment on Nebula Tower bottoms, have not tested on printer - waiting for LDO 2804HT S55 to come back into stock.
Requires 2 parts printed and 2 625zz bearings ( I stripped mine out of the old Ender V rollers - each one has two that press out from the center ).