Single-part Case for ESP32-CAM
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For the "AI Thinker" style boards with a programming shield.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Most of the designs out there are multi part. This one has:
Solid push fit;
Single part design;
No supports needed;
Open bottom for ventilation;
Flash and reset button accessible;
All parts of the module are encased, no jutting out bits.
It does not include any mounting options, but if you have any ideas that keep the constraints, feel free to comment. Or remix, of course!
Installing
If necessary, trim the header pin leads off the back of the board containing the USB connector;
Align the side buttons with the rail indentations on the inside of the case to avoid damage;
Push insert from above.
If you need to remove the module from the case non destructively, you can push on the module from the visible edge of the camera board. Be careful, but it does take a bit of force.